Need some technical advice,
or just some great
design inspiration?
Check us out on Pinterest!


___________________




#volusion_ssl_seal { behavior: url(/a/iepngfix.htc); }

  Home > TOLEX >

Baby Blue Bronco tolex
Baby Blue Bronco tolex
 
Heavy weight 24oz fabric backed vinyl in baby blue.
Tolex is now sold in narrower width and kit options to allow you to wrap your cabinet in one piece and reduce the amount of wasted material!

  • 18" per yd: Tolex is 18" wide and sold by the linear yard (36"). In other words, If you order 1 it will be piece 18" wide by 36" long. Order 2 and it will be a piece 18" wide by 72" long etc.
  • 36" wide per yd: Same as above except in 36" wide -If you order 1 you'll get a piece 36" wide by 36" long. 2 will be a piece 36" wide by 72" long etc.
  • 54" wide per yd: Full 54" wide piece sold by the linear yd. 1yd will be a piece 54" wide by 36" long. 2yds will be a piece 54" wide by 72" long etc
  • 2x12 kit: Includes a 3yd (108in) piece of 18" wide material to wrap the cabinet (top bottom and two sides), and a 24"x36" piece for your back panel.
  • 4x12 kit: Includes a 4yd (144in) piece of 18" wide material to wrap the cabinet (top bottom and two sides), and a 36"x36" piece for your back panel.
SEE "HOW MUCH WILL YOU NEED?" BELOW.

QUANTITY DISCOUNTS ON 54" WIDE MATERIAL
5-9YDS 12% OFF
10+YDS GETS 20% OFF!
(discounts will be calculated when item is added to cart)
Bronco/Levant style tolex in baby blue

Item# Item Name Your Price! Qty Add
TBBB94-18 Baby Blue Bronco tolex - 18" wide (per yard)
$8.99
TBBB94-34 Baby Blue Bronco tolex - 34" wide (per yard)
$15.99
TBBB94-54 Baby Blue Bronco tolex - 54" wide (per yard)
$25.99
SOLD!
TBBB94-2X12 Baby Blue Bronco tolex - 2x12 kit
$33.50
TBBB94-4X12 Baby Blue Bronco tolex - 4x12 kit
$41.99
Check the items you wish to purchase, then click


How much will you need? :
Since most guitar cabinets are only about 10 or 12 inches deep the 18" width tolex should give you enough to cover the depth of the cabinet and to wrap around the edges. Measure around your cabinet (top, bottom, left and right sides) then order enough to wrap all the way around in one piece. Don't forget to order enough for the back panel if your cabinet has one. It is your responsibility to measure and order what you need, but here's a general rule of thumb.

•Most 1x10 or 1x12 speaker cabinets or combo amps will require 2 yds of 18" wide material -don't forget to include enough for your back panel if applicable.
•Most 2x12 combos will require 3 yds. of 18" wide material. Again, don't forget to include enough for your back panel if applicable. (or just order our 2x12 combo kit)

•Most 4x12 cabinets will require 4 yds of 18" wide material, plus back panel (or our 4x12 cab kit) If you need more help measuring and installing Visit my message board!
Share your knowledge of this product. Be the first to write a review »